Unraveling the Hall-Petch to inverse Hall-Petch transition in nanocrystalline high entropy alloys under shock loading

Unraveling the Hall-Petch to inverse Hall-Petch transition in nanocrystalline high entropy alloys under shock loading

International Journal of Plasticity

10.1016/j.ijplas.2024.104010

http://dx.doi.org/10.1016/j.ijplas.2024.104010

Wanghui Li, Meizhen Xiang, Zachary Howard Aitken, Shuai Chen, Yilun Xu, Xinyu Yang, Qingxiang Pei, Jian Wang, Xiaoyan Li, Guglielmo Vastola, Huajian Gao, Yong-Wei Zhang

High entropy alloy, shock loading

19 May 2024

Li, W., Xiang, M., Aitken, Z. H., Chen, S., Xu, Y., Yang, X., Pei, Q., Wang, J., Li, X., Vastola, G., Gao, H., & Zhang, Y.-W. (2024). Unraveling the Hall-Petch to inverse Hall-Petch transition in nanocrystalline high entropy alloys under shock loading. International Journal of Plasticity, 178, 104010. https://doi.org/10.1016/j.ijplas.2024.104010

The transition from Hall-Petch (HP) to inverse Hall-Petch (IHP) behaviors associated with grain size reduction has been recognized for over two decades. However, the underlying mechanisms for such transition in high entropy alloys (HEAs) under dynamic loading, in which abundant deformation mechanisms could be activated either sequentially or simultaneously, remain unclear. Here, we investigate the HP to IHP transition in nanocrystalline CoCrFeMnNi HEAs under shock loading by examining their deformation mechanisms and flow stresses using large-scale molecular dynamics (MD) simulations. It is found that this transition is strongly dependent on the shock pressure as a result of the complex interplay among multiple competing deformation mechanisms, including the hardening mechanisms such as dislocations interactions and grain boundary (GB) blocking, as well as the softening mechanisms like phase formation, amorphization, GB thickening, and grain rotation. Moreover, there exists a critical shock pressure, which corresponds to the largest critical grain size for the HP-IHP transition. Below the critical shock pressure, the critical grain size increases with pressure due to a stronger hardening effect in grain interior (GIs), while above the critical pressure, the critical grain size first decreases and then undergoes a pressure-insensitive plateau before further decrease due to softening effects in GIs. A theoretical model that includes different deformation mechanisms is proposed for the first time to capture the shock pressure-dependent HP-IHP transition. Our work provides valuable guidance for optimizing the grain size of nanocrystalline HEAs for applications involving dynamic loadings.

Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)

This research / project is supported by the A*STAR - Advanced Models for Additive Manufacturing (AM2)
Grant Reference no. : M22L2b0111

This research is supported by the AISG Grand Challenge in AI for Materials Discovery

This research is supported by the A*STAR SERC CRF Award

This research is supported by the National Natural Science Foundation of China

https://oar.a-star.edu.sg/communities-collections/articles/20464

0749-6419

Institute of High Performance Computing