Saglik, K., Wang, X., Tan, X. Y., Dong, J., Luo, P., Zhu, Q., Suwardi, A., & Yan, Q. (2025). High Entropy Bi–Ti Alloying for Improved Sb2Si2Te6 Thermoelectrics. Advanced Engineering Materials, 27(13). Portico. https://doi.org/10.1002/adem.202500380
Abstract:
A2B2Te6 type materials attract significant interest due to their layered structures and inherently low thermal conductivity, but their low electrical conductivity limits their thermoelectric performance. High‐entropy alloying has emerged as an effective strategy to enhance electrical conductivity while preserving low thermal conductivity. This study introduces a two‐step high‐entropy alloying approach in Sb2Si2Te6 where Bi/Ti‐coalloying optimizes the carrier concentration and reduces thermal conductivity. Pisarenko plot analysis reveals a substantial increase in effective mass for Sb1.5Bi0.5Si1.6Ti0.3Te6, resulting in a stable Seebeck coefficient of 210 μVK−1, and a power factor of 700 μWm−1 K−2 between 773–873 K. At 673 K, lattice thermal conductivity drops to 0.26 Wm−1 K−1 at 673 K, approaching the amorphous limit, due to enhanced alloy scattering, point defect scattering, and dislocations as confirmed by scanning electron microscopy (SEM) and transmission electron microscope (TEM) analyses. Jonker plot analysis demonstrates minimal degradation in electrical properties despite the significant reduction in lattice thermal conductivity, improving the quality factor. The combination of optimized Fermi level and reduced thermal conductivity leads to a zT (thermoelectric figure of merit) plateau of 1.11 between 623 and 723 K with an average zT of 0.68. These results highlight the potential of high‐entropy alloying in advancing layered thermoelectric materials.
License type:
Publisher Copyright
Funding Info:
This research / project is supported by the A*STAR - RIE 2025–International Relations
Grant Reference no. : R24I5IR046
This research / project is supported by the Ministry of Education - Academic Research Fund Tier 1 and 2
Grant Reference no. : RG78/23, MOE-T2EP50223-0003
Description:
This is the peer reviewed version of the following article: Saglik, K., Wang, X., Tan, X. Y., Dong, J., Luo, P., Zhu, Q., Suwardi, A., & Yan, Q. (2025). High Entropy Bi–Ti Alloying for Improved Sb2Si2Te6 Thermoelectrics. Advanced Engineering Materials, 27(13). Portico. https://doi.org/10.1002/adem.202500380
, which has been published in final form at https://doi.org/10.1002/adem.202500380. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.