Tan, Y. H., Cagirici, M., Hu, Z., Ong, C. Y. A., Willy, H. J., Li, X., Liang, X., Sui, S., Herng, T. S., Ding, J., & Wang, P. (2026). Process parameter-dependent microstructure and strain hardening behaviour in L-PBF AISI 4340: Role of retained austenite. Additive Manufacturing, 124, 105241. https://doi.org/10.1016/j.addma.2026.105241
Abstract:
Microstructure engineering of AISI 4340 steel via laser powder bed fusion (L-PBF) is demonstrated in this study as a route to achieving a tailored balance of strength, ductility, and strain hardening directly in the as-printed state. By systematically varying laser power and energy density, the influence of process-induced thermal histories on phase formation is examined, including the stabilization of retained austenite (RA) within a tempered martensitic matrix. Through combined experimental characterization and finite element thermal simulations, the presence of metastable RA is found to be associated with enhanced strain hardening via deformation-induced transformation. This enables tailoring of the yield strength (YS)-to-ultimate tensile strength (UTS) ratio (0.65–0.82). The best-performing sample achieves a UTS of 1747 MPa with elongation exceeding 10%, surpassing most reported L-PBF steels. The results indicate that process parameter selection in L-PBF can significantly influence the thermal history, microstructure, and mechanical response. These findings suggest that L-PBF processing provides a promising pathway for microstructure–property design in high-strength steels.
License type:
Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Funding Info:
This research / project is supported by the Agency for Science, Technology and Research - Manufacturing, Trade, and Connectivity Programmatic Fund - Advanced Modelling Models for Additive Manufacturing
Grant Reference no. : M22L2b0111
This research / project is supported by the Singapore Maritime Institute - Advanced Materials & Manufacturing R&D Program
Grant Reference no. : SMI-2016-OF-04