Catalytic Cleaning of Aluminum-Based Ceramic for Low-Noise Electronics

Page view(s)
0
Checked on
Catalytic Cleaning of Aluminum-Based Ceramic for Low-Noise Electronics
Title:
Catalytic Cleaning of Aluminum-Based Ceramic for Low-Noise Electronics
Journal Title:
ACS Omega
Keywords:
Publication Date:
07 August 2025
Citation:
Karuppannan, S. K., Kwek, J., Chanu, S. R., & Mukherjee, M. (2025). Catalytic Cleaning of Aluminum-Based Ceramic for Low-Noise Electronics. ACS Omega, 10(32), 36644–36651. https://doi.org/10.1021/acsomega.5c05772
Abstract:
We report a catalytic cleaning method for aluminum-based ceramic substrates, including aluminum nitride (AlN) and alumina (Al2O3), to enhance the performance of high-frequency, low-noise electronic devices. These ceramic materials are widely used in high-power and RF electronics due to their excellent thermal and insulating properties. However, conventional surface processing techniques, such as laser micromachining and diamond polishing, often introduce carbon-based impurities and defects, particularly in thin substrates (<100 μm), that degrade device performance by increasing dielectric loss. Using X-ray photoelectron spectroscopy (XPS), we confirmed the presence of aluminum carbide (AlC) and other surface contaminants on untreated AlN substrates. The proposed catalytic cleaning method, conducted in a hydrogen-rich atmosphere, effectively removes these impurities and restores surface integrity. Comparative analysis of cleaned and uncleaned samples revealed a substantial reduction in dielectric loss following treatment. This improvement in surface quality directly enhances the performance of devices operating at radio frequencies (RF) and microwave frequencies. It is especially valuable for applications in quantum electronics, where low noise and high interface quality are critical. Our findings provide a practical and scalable approach to optimizing ceramic substrate surfaces, contributing to the development of more reliable and efficient next-generation electronic systems.
License type:
Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)
Funding Info:
This research / project is supported by the National Research Foundation, Singapore and A*STAR - Quantum Engineering Programme
Grant Reference no. : NRF2021-QEP2-03-P07/W21Qpd0307

This research / project is supported by the A*STAR - Science Research Programme
Grant Reference no. : C222517002
Description:
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Omega, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see 10.1021/acsomega.5c05772.
ISSN:
2470-1343
2470-1343