Pan, Y., Li, N., Ran, S., Wen, D., Luo, Q., Li, K., & Zhou, Q. (2022). Efficient Catalysis for Low-Temperature CO Selective Catalytic Reduction over an Fe-Cu Bimetal Oxide Catalyst Supported on Amorphous SiO2. Industrial & Engineering Chemistry Research, 61(28), 9991–10003. https://doi.org/10.1021/acs.iecr.2c01227
Abstract:
Efforts have been devoted to exploring the effective composite catalysts for low-temperature selective catalytic reduction of NOx by CO (CO-SCR) using Fe-Cu bimetal oxide (Fe2Cu1) as the active component and rice husk ash (RHA), amorphous SiO2, and activated carbon (AC) as supports. The results showed that the beneficial role of RHA as a catalyst support for CO-SCR was primarily reliant on amorphous SiO2 in RHA and not on AC. Both Fe2Cu1/RHA and Fe2Cu1/amorphous SiO2 catalysts exhibited the best catalytic performance of CO-SCR, which had good stability, wide active temperature range, high conversion ratio, 100% N2 selectivity, and superior resistance to O2, SO2, and H2O (g). The CO and NOx conversion ratios of Fe2Cu1/amorphous SiO2 could reach up to approximately 100% from 100 to 500 °C. The excellent SCR performance was associated with the large specific surface area and good structural stability of amorphous SiO2, the uniform distribution of active sites, dual redox cycle of Fe2O3 and CuO species, and many surface-adsorbed oxygen species, which made amorphous SiO2-based catalysts highly competitive for application in the SCR process. This research provides the underlying insights for the improvement of industrial application to realize ″non-ammonia SCR″ technology with near-zero NOx/CO emissions synergistically at low temperatures.
License type:
Publisher Copyright
Funding Info:
This work is supported by the National Key Research and Development Program of China (2021YFC3001803) and Instrumental Analysis Center of Xi’an Jiaotong University